Billing increments explained: 6, 15 or 30 minutes
One afternoon of 100 minutes of work, billed with 6, 15 and 30 minute increments. See the exact minutes and dollars each rule produces, and how to pick one.

A billing increment is the smallest block of time you charge for. Every entry is rounded up to the next block, so the increment you choose changes the invoice even when the work does not change. This post bills one fixed set of work three ways so you can see the gap in minutes and dollars.
How an increment works
Under a 6-minute increment, a 1-minute task is billed as 6 minutes. Under a 15-minute increment it is billed as 15. Under a 30-minute increment it is billed as 30. Each task is rounded up to the next block, and the rounded numbers are added together.
Six minutes is one tenth of an hour, which keeps decimal math simple: 6 minutes is 0.1 hours, 12 minutes is 0.2 hours. Fifteen minutes is a quarter hour. Thirty minutes is a half hour.
The example: five tasks, 100 minutes
Say one person spends an afternoon on a single client account, billed at $100 per hour. The afternoon has five tasks:
- Task 1: reply to a client email, 8 minutes
- Task 2: update a tracking spreadsheet, 14 minutes
- Task 3: review a draft, 22 minutes
- Task 4: edit a landing page, 31 minutes
- Task 5: write a status note, 25 minutes
Actual time: 8 + 14 + 22 + 31 + 25 = 100 minutes. At $100 per hour that is 100 ÷ 60 = 1.667 hours, or $166.67. Every figure below is measured against that.
Billed in 6-minute blocks
Round each task up to the next multiple of 6:
- 8 becomes 12
- 14 becomes 18
- 22 becomes 24
- 31 becomes 36
- 25 becomes 30
Total: 12 + 18 + 24 + 36 + 30 = 120 minutes, which is 2.0 hours, or $200.00. That is 20 minutes above the actual time, or 20 percent more.
Billed in 15-minute blocks
Round each task up to the next multiple of 15:
- 8 becomes 15
- 14 becomes 15
- 22 becomes 30
- 31 becomes 45
- 25 becomes 30
Total: 15 + 15 + 30 + 45 + 30 = 135 minutes, which is 2.25 hours, or $225.00. That is 35 minutes above actual, or 35 percent more.
Billed in 30-minute blocks
Round each task up to the next multiple of 30:
- 8 becomes 30
- 14 becomes 30
- 22 becomes 30
- 31 becomes 60
- 25 becomes 30
Total: 30 + 30 + 30 + 60 + 30 = 180 minutes, which is 3.0 hours, or $300.00. That is 80 minutes above actual, or 80 percent more.
Side by side:
- Actual time: 100 minutes, $166.67
- 6-minute blocks: 120 minutes, $200.00
- 15-minute blocks: 135 minutes, $225.00
- 30-minute blocks: 180 minutes, $300.00
The same afternoon produces invoices $100 apart under the 6 and 30 minute rules ($300.00 minus $200.00). The gap is large here because the tasks are short. A single 3-hour task bills identically under all three rules.
The most rounding can add
Rounding up adds at most one increment minus one minute per entry. With five entries, the ceiling is 5 × 5 = 25 extra minutes at 6 minutes, 5 × 14 = 70 at 15 minutes, and 5 × 29 = 145 at 30 minutes. If you log many short entries, the larger increments compound quickly.
Round each entry or the total
The example above rounds every task. You can instead round only the daily or monthly total. Take the 100 minutes as one block:
- 6-minute blocks: 100 ÷ 6 = 16.7, so 17 blocks, 102 minutes
- 15-minute blocks: 100 ÷ 15 = 6.7, so 7 blocks, 105 minutes
- 30-minute blocks: 100 ÷ 30 = 3.3, so 4 blocks, 120 minutes
Rounding the total gives 102, 105 and 120 minutes, against 120, 135 and 180 when each entry is rounded. Whichever you choose, write it into your agreement.
Round up or round to nearest
Some firms round to the nearest block instead of always up. At 15 minutes, nearest rounding gives 8 becomes 15, 14 becomes 15, 22 becomes 15, 31 becomes 30 and 25 becomes 30. Total: 15 + 15 + 15 + 30 + 30 = 105 minutes, or $175.00. Nearest rounding is closer to the real number, and it also rounds some tasks down.
How to pick one
Work through three questions:
- How long is a typical entry? If most of your tasks are under 15 minutes, a 30-minute increment will feel steep to clients. A one-week time audit shows your real task lengths.
- How do you capture time? Timers produce exact durations, and typed entries can drift toward round numbers. See timer or manual entry for the trade-offs.
- Which entries are short by nature? Calls and check-ins often are, so decide your rule before you track meeting time.
If clients regularly argue over minutes, the increment may not be the real problem. Hourly billing itself can invite that argument, and value-based pricing can avoid it for some kinds of work.
Next step
Take last week's time entries and run them through the three rules above, rounding each entry. Compare the three totals and write down which increment you would be comfortable defending to a client.
Ready to run it all in one place?
Projects, clients, time tracking and invoicing in one platform.