Day rate vs hourly rate: when to quote by the day
Learn when a day rate fits better than an hourly rate, how to price one from your own numbers, and see in a worked example how prep and travel change the price of a two-day workshop.

Some work does not fit an hourly invoice. A workshop, an on-site visit or a block of booked days is sold by the day, and the client expects one clear price. This post explains when a day rate is the better choice, how to calculate one from your own numbers, and what to write in the agreement so a "day" means the same thing to both sides.
What a day rate is
A day rate is a fixed price for one working day of your time. The client pays for the day, not for each hour inside it.
That sounds simple, but the day needs a definition. Before you quote, decide what a day includes: the number of working hours, any preparation, travel, and follow-up. Two people can mean very different things by "one day", so write your meaning down.
A day rate is still a price for your time. It does not replace a scope or an estimate. Plan the work first with a clear scope statement, then decide how to price it.
When a day rate fits
A day rate works well when the client is buying your time on specific days, not a specific list of tasks.
- Workshops and training. The session has a fixed length, and the value is in being there.
- On-site or embedded work. You work inside the client's team for set days.
- Discovery and strategy sessions. The output is advice, and the hours are hard to separate.
- Booked blocks. The client reserves two days a week for a month, and you hold that time for them.
In each case, counting minutes would be awkward and would invite arguments. One price per day keeps the conversation simple.
When hourly is the better choice
Hourly pricing suits work that arrives in small, unpredictable pieces. If a client sends a 45-minute request one week and a three-hour request the next, a day rate makes no sense. You would either overcharge for the small task or undercharge for the large one.
Hourly also suits support and maintenance work, where the amount of time is unknown and the client wants to pay only for what they use.
If you are unsure which model fits a project, hourly, fixed fee or retainer: how to choose a pricing model walks through the decision.
Method 1: price from your yearly target
Start with the money you need your time to earn, then divide by the days you can really bill.
Say you need your time to bring in $120,000 in a year. After holidays, sick days, admin and selling, you expect to bill 200 days. This count is an example, so use your own.
120,000 / 200 = $600 a day.
This is your floor. It is what an average billable day must earn for the year to work. If you do not yet have a clear target, start with the hourly rate calculator and build from there.
Method 2: price from the real time of the job
A specific engagement often takes more time than the day itself. Preparation and travel are easy to forget, and they are unpaid unless you price them in.
Take a two-day on-site workshop. Say the time looks like this:
- Delivery. 2 days at 7 hours each is 14 hours.
- Preparation. 6 hours.
- Travel. 3 hours in total.
That is 14 + 6 + 3 = 23 hours. At an hourly rate of $100, the job is worth 23 x 100 = $2,300. Spread across two days, that is 2,300 / 2 = $1,150 a day.
Compare that with billing only the 14 delivery hours: 14 x 100 = $1,400. Spread over the real 23 hours, that is 1,400 / 23 = about $61 an hour. Same work, and you earn about 39% less than your rate, only because prep and travel were left out.
Use the higher of the two
Method 1 gives you the lowest day rate that keeps your year on track. Method 2 shows what this particular job needs. Quote the higher number.
In the example, the floor is $600 and the job needs $1,150, so the quote is $1,150 a day. If the job needed less than the floor, you would still quote the floor. The estimate should also be grounded in real numbers, as described in how accurate are your estimates.
Write down what a day means
A short clause prevents most disagreements. Cover these points in the agreement:
- Hours in a day. For example, "a day is up to 8 hours, including breaks".
- Half days. Say whether you sell them and how they are priced. A half day is often priced above half, because the day is blocked either way. As an example, 60% of $1,150 is $690.
- Preparation and travel. State whether they are included or charged separately.
- Overtime. Say what happens if the work runs past the agreed hours.
- Cancellation. State how much notice is needed and what you charge if a day is cancelled late.
This post is general information, not legal advice. Have a qualified person review the wording of any contract.
Still track your time
A day rate does not mean you stop tracking hours. You track them to learn whether your price was right.
Say you billed $2,300 for the workshop, but follow-up emails and a revised handout brought the real total to 26 hours. Your effective rate was 2,300 / 26 = about $88 an hour. That is below your $100 target, and it tells you to price follow-up work in next time. The idea is covered in effective hourly rate: what you really earn per hour.
HireOrSell can record time against projects and mark it billable or non-billable on its paid plans, which makes this comparison easy. Check the pricing page for current plan details. A simple weekly spreadsheet also works.
Next step
Take your next booking that is sold by the day and write out the full time it needs: delivery, preparation, travel and follow-up. Multiply by your hourly rate and divide by the number of days. Compare the result to your yearly floor, and quote the higher figure.
Ready to run it all in one place?
Projects, clients, time tracking and invoicing in one platform.